Page 1 of 1

PreserveRGB

Posted: March 28th, 2013, 7:45 am
by chrispeterson
Is there a command to enable/disable preserve RGB on a footage item? Couldn't find it in the AECS3/CS4 scripting guides, anywhere on the forums, as well as on google.

Thanks
Chris

Re: PreserveRGB

Posted: March 29th, 2013, 8:21 am
by Paul Tuersley
There's nothing in the FootageSource object section of the CS6 scripting guide, which is where I'd expect to find it if it had been implemented.

Depending on what you're trying to do, you may be able to come up with a workaround by saving a project with placeholders set to the two different options, then use these to replace footage into. There's a good chance that setting will be retained when you do this. Quite a fiddly workaround though.

Paul

Re: PreserveRGB

Posted: April 1st, 2013, 7:40 am
by chrispeterson
Thanks for the response Paul. I was really hoping not to have to do a secondary project import, but at least it confirmed my suspicions about not being able to change it directly.

Thanks again,
chris

Re: PreserveRGB

Posted: April 17th, 2015, 9:59 am
by Amaylayinsues
Does anyone know if this has been changed in the last few years?

Thanks,

Dan